Tuesday, May 22, 2007



Daniel J Chambers. 700130336.

Major Project Development

Glazing detail. I don't want the widow frames standing out this detail will give me a 1cm exposed brass edge at the head of the glazing externally and a 1cm exposed edge at the foot of the window internally. I also like this detail because it allows me to have a flat sill with a hard edge, and a continuous wall line internally with maximum shadow line externally that emphisise the depth of the concrete walls. I have decided to base the form work, major grids, ceilings and floors on a primary and secondary Tatami Matts. Primary: 2400 x 1200. Secondary: 1200 x 600. So glazing panels will be 600 x 1200 with a silcone join between.

Wednesday, May 9, 2007


Daniel J Chambers, 700130336.
Major Project development sketch.
NorthElevation showing entry door, low glazing to showroom and offices,
and form holes. I have expressed the joint as shown to get the form holes on the centre line of entry door.

Daniel Chambers, 700130336.
Major Project development sketch.
EastElevation showing heights, entry line and form holes. I need to raise the awning slightly so that it fall centre between two of the form holes.

Thursday, May 3, 2007


Daniel J Chambers, 700130336,
Major Project development sketch:
I have chosen to develop the 5m x 5m around the entry of the showroom and office. All primary structural elements (Floors, walls, roof) will be made from reinforced concrete, cast in-situ. There will be structural columns and beams internally at 5m (approx depending on size and economy of form work). The low roof over the entry will darken the space, contrasting the light colour of the concrete outside (the cave), the glass over will lighten the space beyond. The formwork will be made from marine ply and will be reused for the dropped ceiling over the showroom. There will be a 600H window along the full length of the north and west wall, from floor level up on both floors. Walls over these windows will be hung from floor/roof over.

Tadao Ando’s Church of the Light is located in Ibaraki, a residential neighbourhood 25 kilometers north-northeast of Osaka. The building can be described simply as a bare concrete box with a wall cutting through it at a 15 degree angle. The heavy cast-in-place walls help separate the religious experience inside the small 113 square meter chapel from the outside world. The delineation between sacred and profane is important on this site, which does not permit much distance between two streets and the church itself.

Church of the Light, Ibaraki, Osaka prefecture, Japan, 1989

The Westin Awaji Island hotel on Awaji Island, Japan. Tadao Ando.

Project Information

The Albury City Library Museum Project is the first in a multi-staged development. It will be one of Australias first fully intigrated regional Library Museum Complexes. The new Library Museum is a partnership between Albury City, NSW Ministry of the Arts and NSW State Library. Client: Albury City Architect: Ashton Raggatt McDougall Contractor: Zauner Construction pty ltd

Albury City Library Museum

Albury City Library Museum
Daniel J Chambers 700 130 336, 1 of 5, 4 March 2007

Albury City Library Museum

Albury City Library Museum
Daniel J Chambers, 2 of 5, 4 March 2007

Albury City Library Museum (floor beam & column detail)

Albury City Library Museum (floor beam & column detail)
Daniel J Chambers 700 130 336, 3 of 5, 4 March 2007.

Albury City Library Museum (detail)

Albury City Library Museum (detail)
Daniel J Chambers 700 130 336, 4 of 5, 4 March 2007.

Albury City Library Museum (roof beam detail)

Albury City Library Museum (roof beam detail)
Daniel J Chambers 700 130 336, 5 of 5, 4 march 2007.